Renovation paints

Kronen® Renovation paint 423

Renovation paints
Kronen® Renovation paint 423
Sealer for interior areas, insulating and highly opaque. Suitable for dirty surfaces indoors, on nicotine and water stains.
Renovierfarbe von Jaegerlacke
usage calculator
Please enter here the surface size in m².
m2
result at a averaged usage from 6.5 m² / l:
per coat of paint
Please consider: the usage values are ca.-values and could varied depending on the constitution of the underground

Barrier paint for interior use, insulating and highly opaque

  • Aromatic-free
  • Low odor
  • Suitable for Styrofoam
  • High covering power: Class 1 (at 6m²/l)
  • Very good stain isolation
  • Wet abrasion resistance Class I (DIN EN 13300)
  • Can be painted over with emulsion paints
  • Suitable for use in food processing areas
     

For matt wall and ceiling coatings. Kronen® renovation paint is suitable for surfaces with difficult stains in interior areas, on nicotine and water stains, as well as on old, stable glue-bonded paints that cannot be recoated with conventional emulsion paints. As it contains only aromatic-free, mild solvents, Kronen® Renovation Paint can also be used in living spaces and food processing areas. For insulating water and nicotine stains, also suitable for polystyrene, can be painted over with conventional emulsion paints.

Renovierfarbe streichen

Coating structure

Highly absorbent, mineral substrates: 1 x deep primer 1-2 x Kronen® renovation paint 423

Wood: 1 x Kronen® insulating primer 321 1-2 x Kronen® renovation paint 423
 

Steel (with additional rust protection): 2 coats of Jaeger Multigrund 715, 1-2 coats of Kronen® Renovating Paint 423

Styrofoam: 1-2 coats of Kronen® Renovating Paint 423

Old paint (dispersion and binding paints, well-adhering glue paints): 1-2 coats of Kronen® Renovating Paint 423

 

Substrate preparation

The substrate must be dry and sound. Sand down any adhering paint coats. Heavily soiled substrates and large areas of grease contamination must be cleaned or renovated.

Processing conditions
 

During the entire application and drying time, the material, substrate, and air temperature must not fall below 8°C or exceed 30°C. The relative humidity should be between 30% and 75% RH during the entire time. If the storage temperature has fallen below 0°C, gel-like structures may form. The paint can be made ready for use again by warming it to room temperature and stirring thoroughly.

Renovierfarbe 12,5L Gebinde

 

Video | Master painter Andy demonstrates the application of JAEGER renovation paint in a smoker's apartment.

product data

spreading rate

paint/roll spraying
6-7 m²/ltr.5-6 m²/ltr.

item number/shade

item number shade
423-9010 weiß

size of trading unit/box content

size of trading unit box content
2,5 l2
12,5 l1
suitable products
Verdünnung für Isolierfarben
Gebindebild von Aqua Renofix, einer wasserverdünnbaren Absperrfarbe
Absperrfarbe von Jaegerlacke - Objekt-Reno