Kronen® Aqua Renofix 335
Water-dilutable barrier paint for interior use
- Can be painted over with emulsion paints
- Excellent insulating properties
- Quick recoatability (after approx. 4 hours)
- Very good covering power, even on water-soluble dirt
- Can be tinted with standard pastel color concentrates
- Free of plasticizers
- Free of aromatic compounds
- Coverage class 1 with a yield of 8 m²/liter
- Wet abrasion class 2 (DIN EN 13300)
- Suitable for use in food processing areas
Kronen® Aqua Renofix 335 is a white, fast-drying, water-dilutable barrier paint for interior use. It is particularly suitable for matt wall and ceiling coatings on old emulsion paints, plasterboard, wallpaper, Styrofoam®, mineral substrates, wood fiber boards, blockboards, and other wood-based materials.
Substrate preparation
Substrates must be clean, dry, and free of dust and grease. Loose particles must be removed. In case of water stains or efflorescence, thoroughly brush off the contaminants with a hard, dry brush; do not clean with water.
Coating structure
For highly absorbent substrates, we recommend priming with a deep primer.
Recoatability
With all emulsion paints. If in doubt, we recommend carrying out preliminary tests. Do not paint over with two-component paints.
Application conditions
During the entire application and drying time, the material, substrate and air temperature must not fall below 8°C or exceed 30°C. The air humidity should be between 30% and 60% relative humidity throughout the entire period.
Drying time (20°C/55% relative humidity):
Touch dry: approx. 40 min., can be painted over after approx. 4 hours. High air humidity and low temperatures delay the drying of the paint film.
Caution: At temperatures below 15°C, the insulating properties may deteriorate. At low temperatures, we recommend accelerating drying by means of targeted air circulation (set up a fan). If this is not possible and difficult soiling/conditions are present, we recommend using Kronen Renovierfarbe 423 (solvent-based).
Our recommendation for application using WAGNER XVLP technology:
Spray attachment: WallSpray
Air volume: Maximum
Material quantity: 12
Dilution: 5%
Our recommendation for application using WAGNER HEA airless technology:
Nozzle type: HEA ProTip
Nozzle size: 517
Thinning: 5%
Spray pressure: 80 bar
Video | Isolating stains with Kronen® Renovating Paint 423 and Kronen® Aqua Renofix 335
product data
spreading rate
| paint/roll | spraying |
|---|---|
| 5-7 m²/ l |
item number/shade
| item number | shade |
|---|---|
| 335-9010 | weiß |
size of trading unit/box content
| size of trading unit | box content |
|---|---|
| 2,5 l | 2 |
| 12,5 l | 1 |
suitable products
