Bath renovation systemFloor coatingsOffice PaintsRoof protectionSeamless wall and floor fillerAnti-graffiti system PrimersRadiator LacquerWood lacquer-/sealInsulating and sealing paintsLÖWE corrosion protectionMarking paintsMetal ProtectionPoolcoatRenovation paintsAnti-Slip-CoatingFillersSpecial protection lacquersDecorative TechniquesSpecial thinners / cleaning agentsTools/Accessories
Primers

Aqua Multi-Primer 716

Primers
Aqua Multi-Primer 716
Water-soluble primer for Interior and exterior use, which is suitable as a primer on iron, steel, zinc, aluminium, various plastics and wood
Wasserverdünnbare Universalgrundierung - Aqua Multigrund von Jaeger
usage calculator
Please enter here the surface size in m².
m2
result at a averaged usage from 10.5 m² / l:
per coat of paint
Please consider: the usage values are ca.-values and could varied depending on the constitution of the underground
DownloadDownload this file

Water-dilutable universal primer for indoor and outdoor use

  • Suitable for powder-coated surfaces
  • Active corrosion protection
  • Weather resistant
  • Fast drying
  • Excellent adhesion
     

JAEGER's water-dilutable universal primer Aqua Multigrund is suitable for base coats on iron, steel, zinc, aluminium, copper, brass, powder coatings, as well as wood (indoors only) and various plastics such as hard PVC, polyester, polyamide and ABS – both indoors and outdoors. Its extensive material compatibility and heat-resistant formulation of up to 80°C dry heat makes it the perfect choice for demanding coating projects. The primer creates a reliable base for further coatings and impresses with its versatile usability in a wide range of environments.

 

Türrahmen schleifen als Vorbereitung zur Grundierung mit Aqua Multigrund
Aqua Multigrund streichen
Kunststofffenster wird mit einem Pinsel grundiert

 

Instructions for use of water-thinnable universal primer

 

1. surface preparation

Checking the load-bearing capacity: Test the adhesion of old coats of paint (e.g. using a cross-cut test).

Cleaning: The surface must be load-bearing, clean, dry and free of rust and other oxidised layers.

Pre-treatment:

  • Remove rust from metal surfaces and sand down.
  • Roughen wood, plastic and metal with a suitable abrasive.
  • Remove grease, oil or release agent residues with solvent.

 

2. processing

Application technique: Brushing, rolling or spraying (airless also possible).

Ambient conditions:

  • Temperature: Material, substrate and air ≥ 8°C during processing and drying.
  • Humidity: 30–75 % r.h.
  • Mixing instructions: Do not mix or tint with other paints/lacquers.

 

3. Coating structure according to material

 

Steel inside/outside

2 x Jaeger Aqua-Multigrund undiluted (3 coats for exterior use)

1-2x top coat

 

Aluminium, zinc, copper, brass

2-3 x Jaeger Aqua-Multigrund undiluted

1x acrylic top coat, no alkyd resin. Coating system

 

Plastic

1 x Jaeger Aqua-Multigrund undiluted

1x top coat

 

Wood, interior

1x Kronen® Isoliergrund 321

1-2x Jaeger Aqua-Multigrund undiluted

1x top coat
 

Please note: do not mix or tint with other paints.

Technical details

Thinning: with max. 10% water.

Drying: (at 20ºC/55% r.h.)

touch-proof: approx. 2 hours

Can be painted over: with water-based top coats after 6 hours, with solvent-based top coats after 24 hours.

+ You can find more information about primers here

product data

spreading rate

paint/roll spraying
9-12 m²/ltr.ca. 6 m²/ltr.

item number/shade

item number shade
716-9010 white

size of trading unit/box content

size of trading unit box content
750 ml6
2,5 l4