Aqualine Marking Paint 380

• For interior and exterior applications
• Quick drying
• Good resistance
• Excellent build and opacity

The colors on the monitor/display are not technically binding. Please refer to the color chart for binding colors.

Substrate preparation

The surface to be painted must be firm, stable, dry and clean. Clean the substrate thoroughly and allow to dry before coating. Any remaining dust or dirt will reduce the durability of the coating.

Application

Brushing, spraying, rolling. When applying with a road marking machine, Aqualine 380 can be applied with the 5mm spray nozzle.

Reflective markings

The additional sprinkling of reflective beads creates a rich luminosity with improved night-time visibility in incident light. Reflective beads 759 are sprinkled into the wet paint immediately after application. Approximately 20% reflective beads are added to the paint quantity. The application of the subsequent scattering agent may result in greater soiling.

Removing old markings

On paving and concrete, existing markings are stripped, on asphalt surfaces the markings are demarked with Aqualine marking paint in the color black.

Other substrates

Sand down old coatings; if in doubt, apply a test coat.

Processing conditions

The material, substrate and air temperature must not fall below 8°C or exceed 30°C during the entire processing and drying time. The air humidity should be between 30% RH and 75% RH during the entire time.

Tool cleaning

With soapy water