Kronen® Zinc Dust Spray 498

Zinc dust spray with 99% zinc purity
- Cathodic corrosion protection for all bare metals
- Very good protection against corrosion
- Heat resistant up to 600°C
- Very well suited for weld seams
- Contains over 90% zinc dust in the dry film
Zinc dust spray with 99% purity in zinc content. Suitable for all ferrous metals, such as car bodies, exhaust systems, gates, machines, fittings, fences, and much more. Highly effective, safe corrosion protection on all bare metals, especially on weld seams. Heat resistant up to 600°C. Suitable for exhaust systems, machines, fences, gates, and for protecting weld seams. Kronen Zinc Dust Spray 498 offers excellent corrosion protection for all ferrous metals such as gates, machines, metal housings, fittings, fences, exhaust systems, car bodies, and much more. Especially for weld seams and other areas prone to corrosion.

Substrates
Bare iron, steel.
Substrate preparation
The substrate must be clean and dry.
Application
Bring the spray can to room temperature (approx. 20°C – 22°C). Shake well before use (at least 2 minutes), apply in several thin coats at a distance of 25 cm. Shake repeatedly between spraying to prevent the pigments from settling.
After use, turn the can upside down and spray until the valve is empty. Cover parts that are not to be painted beforehand. For small areas, make a cardboard template and place it over the area to be painted.
During the entire processing and drying time, the material, substrate, and air temperature must not fall below 8°C or exceed 30°C. The air humidity should be between 30% RH and 75% RH during the entire time. Only process in dry weather and in areas protected from wind.
product data
spreading rate
paint/roll | spraying |
---|---|
1,5-2 m²/400ml |
item number/shade
item number | shade |
---|---|
498-0000 | grau |
size of trading unit/box content
size of trading unit | box content |
---|---|
400 ml | 4 |