2K-PE Fine Putty 419
2K polyester filler with a very smooth surface
- Very good adhesion
- Fast drying
- Easy to sand
- Can also be applied in thick layers
- Suitable for metal, wood, and concrete
Fine filler for metal, wood, or concrete, on surfaces pre-filled with Jaeger 2K-PE Filling Compound 418, for filling small depressions and unevenness, versatile for repair and restoration work. Very good adhesion, fast drying, easy to sand. Produces very smooth surfaces.
Substrate preparation
The substrate must be clean, dry, rust-free, grease-free, non-slip, and load-bearing; loose and sandy layers must be removed. Sand the substrate.
Application
Take the desired amount of filler and mix well with approx. 2.5% hardener. Apply the filler immediately in the desired layer thickness; the processing time is approx. 3–5 minutes. Do not return mixed material to the container. Filling is also possible on cold substrates (min. 5°C); the filler should be at room temperature.
Further processing
After approx. 30 minutes, the filler can be sanded. After a single coat of 400-grit wet sandpaper, the surface is ready for painting.

product data
item number/shade
item number | shade |
---|---|
419-0007 | weiß |
size of trading unit/box content
size of trading unit | box content |
---|---|
250 g | 6 |
1000 g | 6 |